Horizontal Toggle Vertical Injection Moulding Machine
High pressure & with low noise fixed vane pump.
Pressure & flow controlled by proportional valve.
Horizontal mould clamping thought high performance V type toggle.
High performance mould clamping structure.
Suitable for all type of mould from small to big size.
Sliding clamp vice for mould runner & nozzle hole centre.
Hard chrome plated steel tie-bars.
Mould clamp pressure & speed controlled by HMI thought linear scale.
Mould clamp function up to 4 stage (slow fast slow tonnage).
Vertical screw type injection thought high pressure hydraulic cylinder.
Injection pressure & speed controlled by HMI thought linear scale.
Injection unit manually up-down for mould height settings.
Suck back after or before refiling.
Large L/D ratio for optimum melts.
Screw circumferential speed display.
Proven screw geometry for optimum melts homogeneity.
Wear & corrosion resistance plasma nitrated screw & barrel.
Material barrel designed for mould all kind of plastic raw materials.
Center hydraulic ejector.
Hydraulic ejector pressure & speed controlled by HMI.
Best design for long inserts moulding.
Safe, Reliable, Very easy operate machine.
Close tank, suction line & return line filteration.
Contractor operated four zone digital temperature controllers.
Machine can be operate (1) Manual (2) Semi (3) Fully Auto
Electric motor starter with over load relay.
Save material processing charges.
Fastest cycle time for get mass production.
Technical specification
Technical Data | Unit | ABST-45 | ABST-60 | ABST-100 | ABST-150 | ABST-200 | ABST-300 | ABST-500 |
Screw Diameter | mm | 25 | 30 | 35 | 40 | 40 | 40 | 50 |
Injection Pressure | kg/cm2 | 1700 | 1700 | 1600 | 1500 | 1500 | 1500 | 1400 |
Theoretical Shot Volume | cm3 | 49 | 71 | 130 | 207 | 251 | 251 | 275 |
Max. Shot Weight (PS) | g | 45 | 60 | 100 | 150 | 200 | 300 | 250 |
Injection Rate | cm3/sec | 35 | 50 | 71 | 90 | 114 | 114 | 167 |
Screw Stroke | mm | 100 | 100 | 135 | 165 | 200 | 200 | 140 |
Screw Speed Max. | rpm | 0-250 | 0-250 | 0-250 | 0-250 | 0-250 | 0-250 | 0-200 |
Number of Temperature Control | -0 | 3 | 4 | 4 | 4 | 4 | 4 | 5 |
Material Hopper Capacity | | | 88 | 10 | 10 | 20 | 20 | 20 | 20 |
Clamping Force | Tons | 35 | 35 | 50 | 50 | 70 | 70 | 90 |
Toggle Stroke | mm | 175 | 175 | 255 | 255 | 265 | 265 | 340 |
Space Between Tie Bar | mm | 250 x 250 | 250 x 250 | 280 x 260 | 280 x 260 | 315 x 315 | 315 x 315 | 375 x 375 |
Max Mould Height | mm | 175 | 175 | 220 | 220 | 320 | 320 | 400 |
Min Mould Height | mm | 100 | 100 | 120 | 120 | 180 | 180 | 180 |
Tie Bar Diameter | mm | 42 | 42 | 48 | 48 | 55 | 55 | 60 |
Ejector Force | Tons | 20 | 20 | 27 | 27 | 27 | 27 | 33 |
Ejector Stroke | mm | 50 | 50 | 65 | 65 | 75 | 75 | 95 |
Max.Hydraulic Pressure | kg/cm2 | 120 | 120 | 120 | 120 | 120 | 120 | 120 |
Pump Output | liter/min | 20 | 26 | 26 | 40 | 40 | 56 | 56 |
Oil Reservoir Capacity | liters | 60 | 60 | 80 | 100 | 140 | 140 | 180 |
Pump Motor | KW | 2.2 | 2.2 | 3.5 | 3.5 | 5 | 5 | 8.8 |
Barrel Heating | KW | 2.5 | 3.2 | 4 | 5 | 6.1 | 6.1 | 8.3 |
Total Wattage | KW | 4.7 | 5.4 | 7.5 | 8.5 | 11.1 | 11.1 | 17.1 |
Machine Weight | Tons | 0.75 | 0.8 | 0.95 | 1 | 1.5 | 1.5 | 1.9 |
Machine Dimensions (L x W x H) | m | 1.7 x 0.9 x 2.3 | 1.7 x 0.9 x 2.3 | 1.8 x 1 x 2.5 | 2 x 1.09 x 2.7 | 2.2 x 1.17 x 2.9 | 2.2 x 1.17 x 3.2 | 2.4 x 1.3 x 3.8 |